CP2102 USB 2.0 To TTL UART Connector Module


2 in stock



The main chip is CP2102, which generates virtual serial port
USB power, lead out interface includes 3.3V (< 40mA), 5V, GND, TX, Rx, signal pin level is 3.3V, positive logic
The on-board status indicator and transceiver indicator will be on after the driver is correctly installed. The transceiver indicator will flash when communicating. The higher the baud rate, the lower the brightness
Supports baud rate from 300BPS to 1Mbps
Communication format support:

1) 5,6,7,8 data bits;

2) 1,1.5,2 stop bits are supported;

3) Odd, even, mark, space, none check


There are no reviews yet.

Be the first to review “CP2102 USB 2.0 To TTL UART Connector Module”